Pogo Pin Characteristics
Common structure of pogo pin
Pogo pin contact principle
Characteristics
- Long service time, 10,000 times
- No tooling fee,easy go customize
- Adjustable and measurable spring force
- Fine pitch
- Flexible manufacturing ways: SMT,plug-in...
- Save space: help mechanical engineer easily allocatecomponents on PCB
- Good performance on RF solution
- RoHS and Halogen Free
Common internal structure of Pogo Pin
| Structure |
Ball beads structure |
Sloping structure |
Perforated structure |
Claw structure |
| Contact impedance |
≤ 10mΩ |
≤ 30mΩ |
≤ 50mΩ |
≤ 5mΩ |
| Long service time |
10000+ |
10000+ |
10000+ |
500+ |
| Recommended working current |
10A max |
10A max |
10A max |
10A max |
| Contact stability |
★ ★ ★ ★ ☆ |
★ ★ ★ ☆ ☆ |
★ ★ ★ ☆ ☆ |
★ ★ ★ ★ ★ |
| Processing cost |
★ ★ ★ ☆ ☆ |
★ ★ ☆ ☆ ☆ |
★ ★ ☆ ☆ ☆ |
★ ★ ★ ★ ☆ |
| Main application areas |
Mainly used for charging and condition with certain requirements for vibration and shock |
Mainly used for charging or signal transmission of Consumer electronics |
Mainly used for signal transmission or grounding antenna,etc. |
Mainly used high-frequency,anti-instantaneous,the situation which high-reliability is required,such as base stations,military industries,vehicles. |
| Remarks |
The beads increase the internal contacts,the contact is more stable,and the more needle space is required |
The most commonly used structure on the market |
The space is smaller,but the contact is not stable,the current is easy to run through the spring,and it is not recommended for charging |
The needle and the needle tube have multiple contacts to increase the contact stability |
Product Model
| Index | | L | W | H | Pitch | Cap | Positioner | A | B | C | D | Working height | Froce(gf) | PDF |
|---|
| Index | | L | W | H | Pitch | Cap | Positioner | A | B | C | D | Working height | Froce(gf) | PDF |
|---|
| 1 | 100629-4 | 7.2 | 2.5 | 2.7 | 1.6 | Y | Y | 1.2 | 0.5 | 3.5 | 5 | 4.3 | 30±10 | |
| 2 | 100719-4 | 7.2 | 2.5 | 2.7 | 1.6 | Y | Y | 1.2 | 0.5 | 3.2 | 5.5 | 4.75 | 60+0/-15 | |
| 3 | 100705-4 | 7.2 | 2.5 | 2.7 | 1.6 | Y | Y | 1.2 | 0.5 | 3.2 | 5.3 | 4.75 | 30+10/-5 | |
| 4 | 100616-4 | 7.4 | 2.5 | 1.5 | 1.8 | Y | N | 1.5 | 0.6 | 2.3 | 3 | 2.5 | 70±20 | |
| 5 | 100493-4 | 7.4 | 2.5 | 1.5 | 1.8 | Y | N | 1.5 | 1 | 2.6 | 3.6 | 2.95 | 70±20 | |
| 6 | 100287-4 | 7.4 | 2.5 | 1.5 | 1.8 | Y | N | 1.5 | 1 | 4 | 5.7 | 4.7 | 100+60/-20 | |
| 7 | 100522-4 | 7.4 | 2.5 | 1.5 | 1.8 | Y | N | 1.5 | 1.6 | 4.6 | 6.3 | 5.2 | 100+60/-20 | |
| 8 | 110508-4 | 9.8 | 2.8 | 3 | 2.15 | N | Y | 1.8 | 0.5 | 5 | 7 | 5.9 | 120+40/-20 | |
| 9 | 100646-4 | 9.8 | 2.8 | 3 | 2.15 | Y | Y | 1.8 | 0.5 | 5.5 | 7 | 6 | 90 Min | |
| 10 | 100445-4 | 10.2 | 2.5 | 2 | 2.54 | Y | N | 1.65 | 0.4 | 2.2 | 3 | 2.5 | 90 Min | |
| 11 | 100871-4 | 10.2 | 2.5 | 2 | 2.54 | Y | N | 1.65 | 0.4 | 2.2 | 3 | 2.6 | 40 Max | |
| 12 | 100409-4 | 10.2 | 2.5 | 2 | 2.54 | Y | N | 2 | 0.4 | 2.5 | 3.5 | 2.8 | 75 Min | |
| 13 | 100366-4 | 10.2 | 2.5 | 2.5 | 2.54 | Y | N | 2 | 0.4 | 2.7 | 3.5 | 2.8 | 75 Min | |
| 14 | 100405-4 | 10.2 | 2.5 | 2 | 2.54 | Y | N | 2 | 0.4 | 2.7 | 4 | 3.2 | 75 Min | |
| 15 | 100092-4 | 10.2 | 2.5 | 2 | 2.54 | Y | N | 2 | 0.4 | 2.7 | 3.8 | 3.3 | 75 Min | |
| 16 | 110443-4 | 10.2 | 2.5 | 2 | 2.54 | N | N | 2 | 0.5 | 3 | 4.3 | 3.5 | 65 Min | |
| 17 | 100708-4 | 10.2 | 2.5 | 2 | 2.54 | Y | N | 2 | 0.5 | 3 | 4.3 | 3.7 | 40 Min | |
| 18 | 100195-4 | 10.2 | 2.5 | 2.5 | 2.54 | Y | N | 2 | 0.5 | 3.5 | 5 | 3.8 | 60±15 | |
| 19 | 110497-4 | 10.2 | 2.5 | 2 | 2.54 | N | N | 2 | 0.5 | 3.3 | 4.8 | 3.8 | 90 Min | |
| 20 | 100532-4 | 10.2 | 2.5 | 2.5 | 2.54 | Y | N | 2 | 0.5 | 3 | 4.5 | 3.9 | 80 Min | |
| 21 | 100299-4 | 10.2 | 2.5 | 2.5 | 2.54 | Y | N | 1.9 | 1 | 3.5 | 5 | 4 | 90 Min | |
| 22 | 100481-4 | 10.2 | 2.5 | 2 | 2.54 | Y | N | 2 | 0.5 | 3.7 | 5.2 | 4.2 | 105±30 | |
| 23 | 100794-4 | 10.2 | 2.5 | 2 | 2.54 | Y | N | 2 | 0.5 | 3.5 | 5 | 4.2 | 80±20 | |
| 24 | 100238-4 | 10.2 | 2.5 | 2 | 2.54 | Y | N | 2 | 0.5 | 4 | 5.5 | 4.5 | 75±25 | |
| 25 | 100101-4 | 10.2 | 2.5 | 2.5 | 2.54 | N | N | 2 | 0.5 | 4 | 5.5 | 4.5 | 75±25 | |
| 26 | 100804-4 | 10.2 | 2.5 | 2 | 2.54 | Y | N | 2 | 0.5 | 4 | 5.5 | 4.5 | 30±15 | |
| 27 | 1001111-4 | 10.2 | 2.5 | 2 | 2.54 | Y | N | 2 | 0.8 | 4 | 5.5 | 4.5 | 120±30 | |
| 28 | 100770-4 | 10.2 | 2.5 | 2 | 2.54 | Y | N | 2 | 0.5 | 4.5 | 6.3 | 5.1 | 50±10 | |
| 29 | 110415-4 | 10.2 | 2.5 | 2 | 2.54 | N | N | 2 | 0.5 | 4 | 6 | 5.2 | 60±25 | |
| 30 | 100104-4 | 10.2 | 2.5 | 2 | 2.54 | Y | N | 2 | 1 | 5 | 6.5 | 5.5 | 125±30 | |
| 31 | 100535-4 | 10.2 | 2.5 | 2 | 2.54 | Y | N | 1.8 | 0.5 | 5 | 6.5 | 5.5 | 95 Min | |
| 32 | 100225-4 | 10.2 | 2.5 | 2.5 | 2.54 | Y | N | 2 | 1 | 5 | 7 | 6 | 55±15 | |
| 33 | 100224-4 | 10.2 | 2.5 | 2.5 | 2.54 | Y | N | 2 | 1 | 5 | 6.8 | 6 | 85 Min | |
| 34 | 10101041566 | 10.2 | 2.5 | 2.5 | 2.54 | Y | N | 2 | 1 | 5 | 6.8 | 6 | 50±15 | |
| 35 | 100086-4 | 10.2 | 2.5 | 2.5 | 2.54 | Y | N | 2 | 1 | 5.5 | 7.3 | 6.1 | 150±35 | |
| 36 | 1101122-4 | 10.2 | 2.5 | 2 | 2.54 | N | N | 2 | 0.5 | 5.2 | 8 | 6.4 | 120±25 | |
| 37 | 10101041548 | 10.2 | 2.5 | 2.5 | 2.54 | Y | N | 2 | 0.5 | 5.2 | 7.5 | 6.4 | 80±20 | |
| 38 | 110318-4 | 10.2 | 2.5 | 2 | 2.54 | N | N | 2 | 1 | 5.5 | 7.5 | 6.5 | 80 Min | |
| 39 | 100127-4 | 10.2 | 2.5 | 2 | 2.54 | Y | N | 2 | 1.5 | 6 | 8 | 6.65 | 130±35 | |
| 40 | 100143-4 | 10.2 | 2.5 | 2.5 | 2.54 | Y | N | 2 | 1.9 | 6.5 | 8.5 | 7.15 | 168±30 | |
| 41 | 110518-4 | 10.2 | 2.5 | 2 | 2.54 | N | N | 2 | 1.6 | 7.2 | 9.5 | 8 | 130±30 | |
| 42 | 110979-4 | 10.2 | 2.5 | 2 | 2.54 | N | N | 2 | 2.2 | 8.5 | 10.5 | 9 | 150±30 | |
| 43 | 110733-4 | 17.78 | 2.54 | 2.4 | 5.08 | N | N | 2 | 0.5 | 3 | 4 | 3.5 | 110±25 | |
| 44 | 1101131-4 | 17.78 | 2.54 | 2.4 | 5.08 | N | N | 2 | 0.5 | 4 | 5.5 | 4.5 | 50±15 | |
| 45 | 10101041158 | 10.8 | 3.6 | 2.2 | 2.4 | Y | N | 2 | 0.5 | 3.5 | 5 | 4 | 80 min | |
| 46 | 10101121169 | 15.3 | 5.2 | 2.5 | 2.5 | Y | N | 1.8 | 0.5 | 5 | 7 | 5.9 | 120+40/-20 | |
| 47 | 10101041175 | 9 | 2.5 | 1.5 | 3 | Y | N | 2 | 1.5 | 3 | 4 | 3.5 | 110±20 | |
| 48 | 10101041893 | 12.5 | 2.5 | 1.8 | 2.5 | Y | Y | 1.8 | 0.3 | 2.1 | 2.9 | 2.3 | 70±20 | |
| Index | | L | W | H | Pitch | Cap | Positioner | A | B | C | D | E | F | Working height | Froce(gf) | PDF |
|---|
| Index | | L | W | H | Pitch | Cap | Positioner | A | B | C | D | E | F | Working height | Froce(gf) | PDF |
|---|
| 1 | 100078-4 | 9.8 | 2.8 | 3.5 | 2.15 | Y | Y | 1 | 1 | 1.7 | 0.5 | 9.9 | 11.4 | 10.4 | 110±20 | |
| 2 | 100592-4 | 9.8 | 2.8 | 3 | 2.15 | Y | Y | 1 | 1 | 1.8 | 0.5 | 12 | 13.5 | 12.5 | 120±20 | |
| 3 | 1101094-4 | 10.2 | 2.5 | 2 | 2.54 | N | N | 1 | 2.1 | 2 | 0.4 | 2.6 | 3.6 | 2.9 | 80 min | |
| 4 | 100572-4 | 10.2 | 2.5 | 2 | 2.54 | Y | N | 1 | 1 | 2 | 0.4 | 2.7 | 3.6 | 2.9 | 95 Min | |
| 5 | 10101041567 | 10.2 | 2.5 | 2 | 2.54 | Y | N | 1 | 1 | 2 | 0.4 | 2.7 | 3.6 | 2.9 | 50±15 | |
| 6 | 110790-4 | 10.2 | 2.5 | 2 | 2.54 | N | N | 0.8 | 1 | 2 | 0.5 | 3 | 4.3 | 3.5 | 90±25 | |
| 7 | 110791-4 | 10.2 | 2.5 | 2 | 2.54 | N | N | 0.8 | 1 | 2 | 0.5 | 3.5 | 5 | 3.8 | 150±35 | |
| 8 | 110812-4 | 10.2 | 2.5 | 2 | 2.54 | N | N | 1 | 2.1 | 2 | 0.5 | 3.5 | 4 | 3.9 | 150±35 | |
| 9 | 110552-4 | 10.2 | 2.5 | 2 | 2.54 | N | N | 0.8 | 2 | 2 | 0.5 | 4 | 5.5 | 4.5 | 75±25 | |
| 10 | 110969-4 | 10.2 | 2.5 | 2 | 2.54 | N | N | 0.8 | 2 | 2 | 0.5 | 4.5 | 6 | 5.2 | 80 Min | |
| 11 | 110875-4 | 10.2 | 2.5 | 2 | 2.54 | N | N | 0.8 | 2 | 2 | 0.5 | 5 | 6.5 | 5.5 | 75±25 | |
| 12 | 10110041611 | 10.2 | 2.5 | 2 | 2.54 | N | N | 0.5 | 1.75 | 1.83 | 1.1 | 5.2 | 7 | 5.5 | 100±20 | |
| 13 | 10110041395 | 10.2 | 2.5 | 2 | 2.54 | N | N | 1 | 2.5 | 2 | 0.8 | 5.5 | 7.5 | 6.6 | 80 min | |
| 14 | 110789-4 | 10.2 | 2.5 | 2 | 2.54 | N | N | 1 | 2.1 | 2 | 1 | 6.2 | 8.2 | 7.1 | 100±20 | |
| 15 | 10110041607 | 10.2 | 3 | 1 | 2.54 | N | N | 0.8 | 4 | 2 | 1 | 4 | 5.5 | 4.5 | 100±20 | |
| 16 | 10101041608 | 13 | 2.5 | 2 | 3.5 | Y | N | 1 | 2 | 2 | 0.5 | 3.5 | 5 | 4 | 105±30 | |
| 17 | 1101007-4 | 13 | 2.5 | 2 | 3.5 | N | N | 1 | 2.6 | 2 | 0.8 | 10.7 | 12.5 | 11.1 | 120±30 | |
| 18 | 10110041814 | 10.2 | 2.5 | 2.5 | 2.54 | N | N | 0.6 | 2.9 | 1.8 | 1.1 | 6.9 | 10 | 7.7 | 110±20 | |
| 19 | 10101041483 | 15.1 | 2.5 | 2.8 | 3.9 | Y | N | 0.6 | 1.9 | 2 | 1.5 | 6.1 | 8.1 | 6.6 | 60±10 | |
| Index | | L | W | H | Pitch-1 | Pitch-2 | Cap | Positioner | A | B | C | D | Working height | Froce(gf) | | PDF |
|---|
| Index | | L | W | H | Pitch-1 | Pitch-2 | Cap | Positioner | A | B | C | D | Working height | Froce(gf) | | PDF |
|---|
| 1 | 100538-4 | 5.7 | 5.7 | 1.5 | 2.54 | 2.54 | N | N | 2 | 0.4 | 2.2 | 3 | 2.5 | 90 Min | | |
| 2 | 100571-4 | 5.7 | 5.7 | 1.5 | 2.54 | 2.54 | N | N | 2 | 0.4 | 3.5 | 3.3 | 2.8 | 90±20 | | |
| 3 | 110498-4 | 5.7 | 5.7 | 1.5 | 2.54 | 2.54 | N | N | 2 | 0.4 | 2.5 | 3.5 | 2.9 | 100±30 | | |
| 4 | 100280-4 | 5.1 | 5.1 | 1.5 | 2.54 | 2.54 | N | N | 1.9 | 0.9 | 2.9 | 4 | 3.2 | 120±30 | | |
| 5 | 110322-4 | 5.7 | 5.7 | 1.5 | 2.54 | 2.54 | N | N | 2 | 0.5 | 3 | 4.3 | 3.6 | 120±25 | | |
| 6 | 100327-4 | 5.7 | 5.7 | 1.5 | 2.54 | 2.54 | N | N | 2 | 0.5 | 3.3 | 4.8 | 3.8 | 120±20 | | |
| 7 | 100066-4 | 5.7 | 5.7 | 1.5 | 2.54 | 2.54 | N | N | 1.9 | 1 | 3.5 | 5 | 4 | 95 Min | | |
| 8 | 1001066-4 | 5.7 | 5.7 | 1.5 | 2.54 | 2.54 | N | N | 1.9 | 1 | 3.5 | 5 | 4 | 40±10 | | |
| 9 | 110349-4 | 5.7 | 5.7 | 1.5 | 2.54 | 2.54 | N | N | 2 | 0.5 | 4 | 5.5 | 4.5 | 120+30/-20 | | |
| 10 | 110319-4 | 5.7 | 5.7 | 1.5 | 2.54 | 2.54 | N | N | 2 | 1 | 5.5 | 6.5 | 5.8 | 100±30 | | |
| 11 | 100881-4 | 5.7 | 5.7 | 1.5 | 2.54 | 2.54 | N | N | 2 | 1 | 5.5 | 7.5 | 6.5 | 80 min | | |
| 12 | 100882-4 | 5.7 | 5.7 | 1.5 | 2.54 | 2.54 | N | N | 2 | 1.5 | 6 | 8 | 6.9 | 110±30 | | |
| 13 | 100882-4 | 5.7 | 5.7 | 1.5 | 2.54 | 2.54 | N | N | 2 | 1.5 | 6 | 8 | 6.9 | 110±30 | | |
| 14 | 110671-4 | 8 | 4.6 | 2 | 5.08 | 2 | N | N | 2 | 1 | 5.5 | 7.5 | 6.5 | 80 Min | | |
| 15 | 10110041833 | 5.7 | 5.7 | 1.5 | 2.54 | 2.54 | N | N | 2 | 0.5 | 3.2 | 4.5 | 3.7 | 60±20 | 尾针0.43*1.75 | |
